JOIST HANGERS

Home > HARDWARE > BUILDING MATERIALS > JOIST HANGERS & CONNECTORS > JOIST HANGERS

Sort By:

Page of 1


Simpson Strong-Tie LU LU24 Joist Hanger, 3-1/8 in H, 1-1/2 in D, 1-9/16 in W, 2 x 4 in, Steel, Galvanized/Zinc Our Price: $0.89	Simpson Strong-Tie LUS LUS24 Joist Hanger, 3-1/8 in H, 1-3/4 in D, 1-9/16 in W, 2 x 4 in, Steel, Galvanized/Zinc Our Price: $0.99	Simpson Strong-Tie LU LU26 Joist Hanger, 4-3/4 in H, 1-1/2 in D, 1-9/16 in W, 2 x 6 in, Steel, Galvanized/Zinc Our Price: $0.99

The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.


Simpson Strong-Tie LUS LUS24Z Joist Hanger, 3-1/8 in H, 1-3/4 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $1.19	Simpson Strong-Tie LU LU28 Joist Hanger, 6-3/8 in H, 1-1/2 in D, 1-9/16 in W, 2 x 8 in, Steel, Galvanized/Zinc Our Price: $1.25	Simpson Strong-Tie LU LU210 Joist Hanger, 7-13/16 in H, 1-1/2 in D, 1-9/16 in W, 2 x 10 in, Steel, Galvanized/Zinc Our Price: $1.39

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.	The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.


Simpson Strong-Tie LUS LUS26 Joist Hanger, 4-3/4 in H, 1-3/4 in D, 1-9/16 in W, Steel, Galvanized/Zinc Our Price: $1.45	Simpson Strong-Tie LUS LUS26Z Joist Hanger, 4-3/4 in H, 1-3/4 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $1.89	Simpson Strong-Tie LUS LUS210 Joist Hanger, 7-13/16 in H, 1-3/4 in D, 1-9/16 in W, Steel, Galvanized/Zinc Our Price: $2.15

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie LUS LUS28Z Joist Hanger, 6-5/8 in H, 1-3/4 in D, 1-9/16 in W, 2 x 8 in, Steel, ZMAX Our Price: $2.69	Simpson Strong-Tie LUC LUC26Z Joist Hanger, 4-3/4 in H, 1-3/4 in D, 1-9/16 in W, 2 x 6 in, Steel, ZMAX Our Price: $2.69	Simpson Strong-Tie LUS LUS28 Joist Hanger, 6-5/8 in H, 1-3/4 in D, 1-9/16 in W, Steel, Galvanized/Zinc Our Price: $2.69

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie LUS LUS210Z Joist Hanger, 7-13/16 in H, 1-3/4 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $2.75	Simpson Strong-Tie LUS LUS26-2 Joist Hanger, 4-15/16 in H, 2 in D, 3-1/8 in W, Steel, Galvanized/Zinc Our Price: $3.25	Simpson Strong-Tie IUS IUS2.37/9.5 I-Joist Hanger, 9-1/2 in H, 2 in D, 2-7/16 in W, 2-5/16 x 9-1/2 in, Steel Our Price: $3.45

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.


Simpson Strong-Tie APLH APLH24 Joist Hanger, 3-5/16 in H, 1-7/8 in D, 1-9/16 in W, 2 x 4 in, Steel, Black, ZMAX Our Price: $3.49	Simpson Strong-Tie APLH APLH26 Joist Hanger, 5-1/8 in H, 1-7/8 in D, 1-9/16 in W, 2 x 6 in, Steel, Black, ZMAX Our Price: $3.65	Simpson Strong-Tie LUC LUC210Z Joist Hanger, 7-3/4 in H, 1-3/4 in D, 1-9/16 in W, 2 x 10 in, Steel, ZMAX Our Price: $4.15

APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.	APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.	The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.


Simpson Strong-Tie LUS LUS28-2 Joist Hanger, 7 in H, 2 in D, 3-1/8 in W, Steel, Galvanized/Zinc, Face Mounting Our Price: $4.15	Simpson Strong-Tie LUS LUS210-2 Joist Hanger, 8-15/16 in H, 2 in D, 3-1/8 in W, Steel, Galvanized/Zinc Our Price: $4.29	Simpson Strong-Tie LUS LUS26-2Z Joist Hanger, 4-15/16 in H, 2 in D, 3-1/8 in W, Steel, ZMAX, Face Mounting Our Price: $4.35

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie HUS HUS26 Joist Hanger, 5-3/8 in H, 3 in D, 1-5/8 in W, 2 x 6 in, Steel, Galvanized/Zinc Our Price: $4.65	Simpson Strong-Tie HTU HTU26 Truss Hanger, 5-7/16 in H, 1-5/8 in W, Steel, Galvanized, Face Mounting Our Price: $4.75	Simpson Strong-Tie IUS IUS2.37/11.88 I-Joist Hanger, 11-7/8 in H, 2 in D, 2-7/16 in W, 2-5/16 x 11-7/8 in, Steel Our Price: $5.29

The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.	The HTU face-mount truss hanger has nail patterns designed specifically for shallow heel heights, so that full allowable loads apply to heel heights as low as 3-7/8 in. Minimum and maximum nailing options provide solutions for varying heel heights and end conditions. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2 in maximum to allow for greater construction tolerances.	The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.


Simpson Strong-Tie IUS IUS2.56/9.5 I-Joist Hanger, 9-1/2 in H, 2 in D, 2-5/8 in W, 2-1/2 to 2-9/16 x 9-1/2 in Our Price: $5.55	Simpson Strong-Tie LUS LUS44Z Joist Hanger, 3 in H, 2 in D, 3-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $5.65	Simpson Strong-Tie IUS IUS2.06/9.5 I-Joist Hanger, 9-1/2 in H, 2 in D, 2-1/8 in W, 2 x 9-1/2 in, Steel Our Price: $5.95

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.


Simpson Strong-Tie U U26R Joist Hanger, 5-5/8 in H, 2 in D, 2-1/16 in W, Steel, Galvanized/Zinc, Face Mounting Our Price: $6.19	Simpson Strong-Tie IUS IUS2.56/11.88 I-Joist Hanger, 11-7/8 in H, 2 in D, 2-5/8 in W, 2-1/2 to 2-9/16 x 11-7/8 in Our Price: $6.19	Simpson Strong-Tie IUS IUS2.06/11.88 I-Joist Hanger, 11-7/8 in H, 2 in D, 2-1/8 in W, 2 x 11-7/8 in, Steel Our Price: $6.25

The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.	The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.	The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.


Simpson Strong-Tie ITS ITS2.56/9.5 Top Flange Hanger, 9-7/16 in H, 2 in D, 2-5/8 in W, 2-1/2 to 2-9/16 x 9-1/2 in Our Price: $6.35	Simpson Strong-Tie LRUZ LRU26Z Rafter Hanger, 5-1/4 in H, 1-15/16 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $6.45	Simpson Strong-Tie LUS LUS28-2Z Joist Hanger, 7 in H, 2 in D, 3-1/8 in W, Steel, ZMAX, Face Mounting Our Price: $6.49

The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.	The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie IUS IUS3.56/11.88 I-Joist Hanger, 11-7/8 in H, 2 in D, 3-5/8 in W, 3-1/2 x 11-7/8 in, Steel Our Price: $6.55	Simpson Strong-Tie LUS LUS210-2Z Joist Hanger, 8-15/16 in H, 2 in D, 3-1/8 in W, Steel, ZMAX, Face Mounting Our Price: $6.65	Simpson Strong-Tie HUS HUS28 Joist Hanger, 7-1/16 in H, 3 in D, 1-5/8 in W, 2 x 8 in, Steel, Galvanized/Zinc Our Price: $6.65

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie IUS IUS2.56/14 I-Joist Hanger, 14 in H, 2 in D, 2-5/8 in W, 2-1/2 to 2-9/16 x 14 in, Steel Our Price: $7.15	Simpson Strong-Tie ITS ITS2.56/11.88 Top Flange Hanger, 11-13/16 in H, 2 in D, 2-5/8 in W, Steel, Galvanized/Zinc Our Price: $7.25	Simpson Strong-Tie ITS ITS2.56/14 Top Flange Hanger, 13-15/16 in H, 2 in D, 2-5/8 in W, 2-1/2 to 2-9/16 x 14 in Our Price: $8.15

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.	The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.	The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.


Simpson Strong-Tie ITS ITS3.56/11.88 Top Flange Hanger, 11-13/16 in H, 2 in D, 3-5/8 in W, 3-1/2 x 11-7/8 in, Steel Our Price: $8.59	Simpson Strong-Tie LUS LUS210-3Z Joist Hanger, 8-3/16 in H, 2 in D, 4-5/8 in W, 2 x 10 in, Steel, ZMAX Our Price: $8.99	Simpson Strong-Tie ITS ITS3.56/14 Top Flange Hanger, 13-15/16 in H, 2 in D, 3-5/8 in W, 3-1/2 x 14 in, Steel Our Price: $9.45

The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.	The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.


Simpson Strong-Tie LRUZ LRU210Z Rafter Hanger, 8-3/16 in H, 1-15/16 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $9.59	Simpson Strong-Tie LRUZ LRU28Z Rafter Hanger, 6-15/16 in H, 1-15/16 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $9.79	Simpson Strong-Tie LUS LUS28-3Z Joist Hanger, 6-1/4 in H, 2 in D, 4-5/8 in W, 2 x 8 in, Steel, ZMAX Our Price: $10.59

The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.	The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.	The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie DTT DTT2Z Deck Tension Tie, 3 in L, 3-1/4 in W, Steel, ZMAX, Fastening Method: Screw Our Price: $10.95	Simpson Strong-Tie HUS HUS410 Joist Hanger, 8-15/16 in H, 2 in D, 3-9/16 in W, 4 x 10 in, Steel, Galvanized/Zinc Our Price: $12.05	Simpson Strong-Tie HUS HUS412 Joist Hanger, 10-3/4 in H, 2 in D, 3-9/16 in W, 4 x 12 in, Steel, Galvanized/Zinc Our Price: $12.69

DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications.	The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.	The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie SUL SUL26Z Hanger, 5 in H, 2 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $12.79	Simpson Strong-Tie SUR SUR26Z Hanger, 5 in H, 2 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $12.79	Simpson Strong-Tie HHUS HHUS410 Hanger, 9 in H, 3 in D, 3-5/8 in W, 4 x 10 in, Steel, Galvanized, Face Mounting Our Price: $12.85

The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.	The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.	The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie HUS HUS1.81/10 Joist Hanger, 8-7/8 in H, 3 in D, 1-13/16 in W, 1-3/4 X 9-1/2 in, Steel Our Price: $12.89	Simpson Strong-Tie HH HH6 Header Hanger, 5-1/8 in H, 5-1/2 in W, Steel, Galvanized Our Price: $18.89	Simpson Strong-Tie SUL SUL210Z Hanger, 8-1/8 in H, 2 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $19.75

The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.	For fast, accurate installation of door and window headers and other cross-members. HH header hangers can speed up the job, strengthen the frame and eliminate the need for trimmers.	The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.


Simpson Strong-Tie SUR SUR210Z Hanger, 8-3/16 in H, 2 in D, 1-9/16 in W, Steel, ZMAX, Face Mounting Our Price: $19.75	Simpson Strong-Tie LSSR LSSR410Z Rafter Hanger, 8-5/16 in H, 3-5/8 in W, 4 x 10 in, Carbon Steel, ZMAX Our Price: $23.45	Simpson Strong-Tie HHUS HHUS5.50/10 Hanger, 9 in H, 3 in D, 5-1/2 in W, 5-1/2 X 9-1/4 in, Steel, Galvanized Our Price: $25.59

The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.	The patent-pending LSSR light slopeable/skewable rafter hanger is the next generation of a field-adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger, it is field-adjustable for skews up to 45 deg and features an innovative hinged swivel seat which adjusts up to a 45 deg slope.	The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.


Simpson Strong-Tie APHH APHH46 Joist Hanger, 5-1/8 in H, 3 in D, 3-9/16 in W, 4 x 6 in, Steel, Black, ZMAX Our Price: $26.29	Simpson Strong-Tie HUC HUC210-2Z Heavy-Duty Joist Hanger, 8-13/16 in H, 2-1/2 in D, 3-1/8 in W, 2-5/16 x 11-7/8 in Our Price: $26.55	Simpson Strong-Tie HGUS HGUS5.50/10 Joist Hanger, 8-15/16 in H, 4 in D, 5-1/2 in W, 5-1/2 x 10 in, Steel Our Price: $58.85

APHH heavy hangers connect 4X and 6X beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents? structural wood screw and hex head washer and to the header with the Strong-Drive? SDS heavy-duty connector screw.	The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.	The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high-loads for an economical price.